Central Vacuum System
Dust/Chip Extraction - Cleaning - Material Transportation
To size systems you need to consider a few things:
- how many operators/machines
- for what type of operations/ what kind of material is being picked up
- how many are working and using the system at the same time
- what distance does the material have to travel
- do you need to recover the collected material - preseparator
- how often would you like to empty the waste - container/bag/bucket/
- maintenance needs
- sound sensitivity - placement of central unit
- do you want one big system or many smaller ones
We design the system to meet your needs.
We can also provide a fully customized solution at a competitive price. At Dustcontrol we have an extensive experience in designing and constructing innovative customised solutions ensuring that we can provide a high level of system integration and customer value.
How does Dustcontrols stationary vacuum system fit into the value chain?
- Vacuum transport as a part of the manufacturing process
- Fewer breaks in the manufacturing process
- Shorter maintenance breaks
- Lower repair expenses
- Lower heating expenses
- More efficient waste management/ recycling
Health & Environment
- Cleaner and safer working environment
- Meet the demands of Health and Safety legislation
- Motivated and healthy employees
- Improved organisational culture
- Easier to recruit and retain staff
- Automated recycling
- Increased product quality by elimination of dust, liquid, or smoke at the source.
- Clean products ready for delivery or the next stage in the manufacturing process.
To attain the desired benefits with an extraction system, the system must be complete, from the suction casing to the vacuum producer. All the components of the system are equally important in implementing its´ functionality.
Vacuum Producers- Turbo pumps or Radial Blower
The vacuum producer is at the heart of the system. Here the negative pressure is created that drives the system. In Dustcontrol extraction systems, the vacuum level is generally from 6-40 kPa.
Our normal source extraction and vacuum cleaning system use turbo pumps. This device has an ideally suited characteristics capacity for this type of system. Vacuum level increases as more resistance is presented, an important quality in minimizing the possibility of blockages in the tubing system.
For applications involving fume and light dust, such as paper, radial blowers are used. These have a larger air-flows and operate at a lower relatively constant, vacuum level.
Our turbo pumps and radial blowers have a very high quality silencing.
The tubing system transports the material from the point of collection to the central unit. Dust is generally abrasive, some more than others, therefore the standard material thickness of the tubing system is 1,5 mm. Applications with fume and light dust use reinforced spiral duct. Stainless tubing systems and extra abrasion resistant fittings are available.
Dustcontrol has a very comprehensive assortment of tubing fittings and installation hardware. This gives greater flexibility in design and installation of our tubing systems. Our mechanical jointing system makes alterations and additions very easy to carry out.
Work Place Equipment
An extraction system is sized for only those outlets which are to be used simultaneously. This is in order to maximize efficiency and minimize the size of the central unit. All outlets must have some type of closure, either a valve or shutter. These can be manually actuated, such as flap valves or manual shutter valves, or automatically controlled for actuation only when extraction is required.
The Flexpipe can be used for fume extraction, high flexibility and small diameter allow it to be placed very close to the fume source.
Overhead suspension arrangements such as swing-arms and hose reels can increase the usefulness of the system, increase ergonomics and minimize potential trip hazards from hose left on the floor.
When large volumes of material are to be introduced into the system, stainless floor funnels can be used from which the material is then extracted.
A hose must have many qualities, the foremost for the operator however is flexibility. It should also be tough enough to withstand the abrasion created when transporting the extracted material. Hose selection should include consideration of abrasion, chemical and heat resistance as well as conductivity to static electricity. Dustcontrol has a comprehensive assortment of hose types, diameters and hose connections.
Cleaning tools, suction casings and special nozzles are those components that are actually used to capture the contaminant. The design and effectiveness of these will determine the efficiency and acceptance of the entire system. This demands a varied and complete assortment of specially designed products. Dustcontrol has that. If a standard product does not exist, we have the capacity to design and manufacture it.
Motor starters and System Control Panels control the operation of the system, both operation of the vacuum producers and cleaning of the filter. A variety of other control functions can be installed as required.
Even with a rather basic control system, intelligent features can be included to clear coarse material in the main tubing runs or control vacuum production and therefore energy consumption according to actual requirements.