Joint Abrasion Resistant Bend

Joint Abrasion Resistant Bend Art nr Show models Hide models

Ø 76 3243
Ø 108 3244

An effective tubing system has to meet certain requirements. Constant transport velocity in the tubing at different loads is one require­ment. Correct transport velocity is another. When the velocity is too low, the material will cause a blockage. When the velocity is to high, this will lead to unnecessary wear and loss of energy. Dustcontrol's competent staff can dimension a system to your needs.  

When transporting material in a tubing system turbulent flow will cause noise. Material particles impact the hard tubing walls. Using an elastomer (EPDM- and NBR-rubber) in bends, branch pipes and mounting brackets moderates the sound considerably.  

Bends and branch pipes are designed to withstand high negative pressure. The bends are designed with a radial ridge to spread the impact area of the mateial thereby reducing wear and minimizing the risk of blockage.  

Every elastomer bend and branch pipe are designed with a plugged hole, that can be used for measuring and inspection. The advantages with the elastomer tubing system are:

  • Low noise
  • Blockage risk reduced
  • Reduced wear

The measurements are in millimeter if nothing else is given.


Part No Desc. Ø d (mm) r (mm) B (mm) t (mm) m (kg)
3235 Ø 76 87 175 50 7.0 5.0
3234 Ø 108 121 250 50 5.5 10.6