DCF Mobile Standard / 7010
The DCF Mobile is suitable for the separation of different types of coarse material, liquids and water. It is light and fitted with wheels, so it can be connected to the workplace directly, thereby reducing the loading on the ducting system and minimizing the risk of blockage. DCF Mobile is the standard model of the mobile pre-separator. For emptying, the snap-on catches on the top cover are released and the material is shoveled or tipped out.
Mobile with Water Separator / 7009
The DCF Mobile Water Separator is fitted with Ø50 mm drain valve. This is used where large amounts of water will be separated.
Mobile with Liquid Separator / 7073
The DCF Mobile Liquid Separator is fitted with an intermediate grill and drain valve. It is suitable for handling chips where cutting fluids and coolants are also collected.
Mobile with Cyclone / 7097
The DCF Mobile Cyclone has a high efficiency cyclone mounted on the top cover. Thanks to the small diameter of the cylinder in relation to its height and to the especially shaped inlet, this separator can separate even smaller and lighter materials such as asbestos fibres. The separated material then falls into the container which is fitted with a plastic bag for dust-free handling.
Mobile with Plastic bag / 7074
The DCF Mobile complete with plastic bag has the same fittings as the standard model plus plastic bags and a pressure compensating hose in order to obtain the same vacuum outside and inside the plastic bag. This pre-separator is suitable for use when handling materials which need to be collected in a sealed package.
|Technical Data||DCF Mobile|
|Container volume [l/gal]||95/25.1|
|Height [mm/in]||900/35.4 (without cyclone)|
|Height [mm/in]||1650/65 (with cyclone)|
|Container diameter [mm/in]||440/17.3|
|Weight [kg/lb]||30/66 (without cyclone)|
|Weight [kg/lb]||35/77 (with cyclone)|
|Inlet/Outlet Ø [mm/in]||76/3|
|Air flow [m3/h / cfm]||100–500/59-294|